| Wavelengths | Bandpass | Typical Insertion Loss | Isolation | Directivity | Thermal Stability | Operating Temp. | Port Config | Package | |
| Standard WDMs/Filters | 1310/1550nm,
1310/1625nm |
(+/-)10nm | <0.5dB | >16dB
or >35dB |
> 60dB | < 0.2dB | -40C to +85C | 1 X 2 | Tube, Aluminum bar
or box |
| Pump (EDFA) | 980/1550nm, 1064/1480nm, 980/1480nm, |
(+/-)10nm
|
< 0.5 dB | >16dB or >35dB |
> 60dB | < 0.2dB | -40C to +85C | 1 X 2 | Tube, Aluminum bar
or box |
| Pump (Raman) | 1064/1310nm | (+/-)10nm | < 0.5 dB | >16dB or >35dB |
> 60dB | < 0.2dB | -40C to +85C | 1 X 2 | Tube, Aluminum bar
or box |
| Standard WDMs: FONT's WDMs are ideal for multiplexing of two wavelengths (1310nm and 1550nm or custom wavelengths) from two fibers, onto one fiber or demultiplexing of two wavelengths from one fiber into two fibers each carrying one wavelength. FONT's standard WDMs increase network capacity by 100% and are ideal for establishing duplex transmission on a single fiber. FONT's standard and high isolation WDMs provide greater than 16 dB and 35 dB of isolation respectively. Higher isolation can be achieved by using FONT's high quality filters. Custom design: Pump WDMs: FONT's WDMs are ideal for cable TV applications, long haul communications and fiber amplifiers (EDFA, Raman). WDMs are also widely used in , sensor technology, two window OTDR testing, dual wavelength laser sources and laboratory test and measurements. FONT's WDMs are available in variety of package styles. |
Fig.1 |